Rare Earth Permanent Magnet 20140731-2
Custom Samarium Cobalt Magnets, SmCo Magnets, Neodymium Magnets, NdFeB Magnets
Inquire SmCo Magnet Manufacturer China Rare Earth Magnet Limited:
We mainly purchase product for worldwide steel plant. Please find the attached specification of samarium cobalt magnet (SmCo) for our cold strip mill in Ijmuiden. Please advise whether your product can meet with our requirement.
Looking for Samarium Cobalt Permanent Magnet :
Type: Round Rare Earth Magnet
Material: As Preference Samarium-Cobalt
Temperature: suitable for temperature >200gr C
Circumstances repeat fastening on hot rolls with a temperature of 150 Gr. C. and cool down to room temperature. Pulling power: 500-600N (higher puling power after consideration with our end-user; lower pulling power not acceptable)
Dimensions: height=max. 12mm, diameter: max. 50 mm
Fastening possibilities: with countersunk hex. Bolt M5 (hole in the middle of the magnet) or include with fabricated threaded end M5, 1~12mm
Attention point: the material is very important. Only samarium cobalt magnet can work at 150gr C.
Inquiry Neodymium Permanent Magnet Manufacturer China Rare Earth Magnet Limited:
I am from the Philippines. I would like to order 4 sets of sintered neodymium iron boron magnet (NdFeB).
Size: 5 inches outside diameter
4.5 inches inside diameter
60 degrees
9 centimeter long
Grade: N48H
Magnetization Direction: Diametrically
Delivery term: Door to door
Inquiry Disc Shape Bonded NdFeB Permanent Magnets:
Maybe you could ignore that for now. As long as your product can meet our specifications，I will state our requirements again.
Disc shape: diameter-10mm; height- 4mm; (I will send you the mechanical drawing at work tomorrow.)
Operating temp: -40 to 150
Flux density at 1.8mm gap of the bonded rare earth magnet is 45mT
Temp coefficient>-2.4%/degree (absolute value < 2.4%/degree)
Four items above are our critical requirements. If you do have some bonded neodymium permanent magnet meet these requirements, we can give a try for your samples.
Inquire SmCo Magnet Manufacturer China Rare Earth Magnet Limited:
We mainly purchase product for worldwide steel plant. Please find the attached specification of samarium cobalt magnet (SmCo) for our cold strip mill in Ijmuiden. Please advise whether your product can meet with our requirement.
Looking for Samarium Cobalt Permanent Magnet :
Type: Round Rare Earth Magnet
Material: As Preference Samarium-Cobalt
Temperature: suitable for temperature >200gr C
Circumstances repeat fastening on hot rolls with a temperature of 150 Gr. C. and cool down to room temperature. Pulling power: 500-600N (higher puling power after consideration with our end-user; lower pulling power not acceptable)
Dimensions: height=max. 12mm, diameter: max. 50 mm
Fastening possibilities: with countersunk hex. Bolt M5 (hole in the middle of the magnet) or include with fabricated threaded end M5, 1~12mm
Attention point: the material is very important. Only samarium cobalt magnet can work at 150gr C.
Inquiry Neodymium Permanent Magnet Manufacturer China Rare Earth Magnet Limited:
I am from the Philippines. I would like to order 4 sets of sintered neodymium iron boron magnet (NdFeB).
Size: 5 inches outside diameter
4.5 inches inside diameter
60 degrees
9 centimeter long
Grade: N48H
Magnetization Direction: Diametrically
Delivery term: Door to door
Inquiry Disc Shape Bonded NdFeB Permanent Magnets:
Maybe you could ignore that for now. As long as your product can meet our specifications，I will state our requirements again.
Disc shape: diameter-10mm; height- 4mm; (I will send you the mechanical drawing at work tomorrow.)
Operating temp: -40 to 150
Flux density at 1.8mm gap of the bonded rare earth magnet is 45mT
Temp coefficient>-2.4%/degree (absolute value < 2.4%/degree)
Four items above are our critical requirements. If you do have some bonded neodymium permanent magnet meet these requirements, we can give a try for your samples.
