Ferrite Disc Magnets 20141219
Ferrite Permanent Magnet Manufacturer China Rare Earth Magnet Limited
Ferrite magnets are produced by powder metallurgy. They have low residual magnetism and small responsive magnetic conduction rate. With big coercive force and strong resistance, are applicable for magnetic circuits as a dynamic working condition. They are hard and frail, which can be cut by emery machines. The main composite materials are oxide that is not easy to corrode. The working temperature ranges from -40ºC to 200ºC.
Ferrite magnets can be classified into anisotropy and isotropy. Isotropic sintered permanent magnet materials have weak performance, but they can be magnetized through different direction, while anisotropic magnetic materials have strong performance, but they only can be magnetized through predetermined direction.
China Rare Earth Magnet Limited custom ferrite disc magnets in many sizes, if you demand such products, please advise us diameter, thickness, grades (like C5, C8, Y30, Y35, Y30BH and so on), distribution of N and S poles, quantity, delivery item. If you have any special requirement or demand injection molding ferrite , please provide us drawings with enough information.
D22*22mm Ferrite Cylinder Magnets with Thickness Magnetization Direction
D19*3mm Round Small Ferrite Magnet Plate
Disc Ferrite Permanent Magnets
D15*20mm Cylinder magnets
D25*3mm Round magnets with various specifications
D15*4mm Circular magnets
D31*5.3/10.6*15mm Magnets with countersunk hole
D30*3mm Disc magnets
D10*5mm Round magnets
D15*3mm Disc magnets
D25*5mm Small disc
D40*10mm Round magnets
D28*3mm Magnets with single-sided chamfer
D18*5mm Magnets with double-sided chamfers
China Rare Earth Magnet Limited manufactures sintered ferrite ring magnet , block magnets, and other complex shapes, as well as neodymium magnets.
Ferrite magnets are produced by powder metallurgy. They have low residual magnetism and small responsive magnetic conduction rate. With big coercive force and strong resistance, are applicable for magnetic circuits as a dynamic working condition. They are hard and frail, which can be cut by emery machines. The main composite materials are oxide that is not easy to corrode. The working temperature ranges from -40ºC to 200ºC.
Ferrite magnets can be classified into anisotropy and isotropy. Isotropic sintered permanent magnet materials have weak performance, but they can be magnetized through different direction, while anisotropic magnetic materials have strong performance, but they only can be magnetized through predetermined direction.
China Rare Earth Magnet Limited custom ferrite disc magnets in many sizes, if you demand such products, please advise us diameter, thickness, grades (like C5, C8, Y30, Y35, Y30BH and so on), distribution of N and S poles, quantity, delivery item. If you have any special requirement or demand injection molding ferrite , please provide us drawings with enough information.
D22*22mm Ferrite Cylinder Magnets with Thickness Magnetization Direction
D19*3mm Round Small Ferrite Magnet Plate
Disc Ferrite Permanent Magnets
D15*20mm Cylinder magnets
D25*3mm Round magnets with various specifications
D15*4mm Circular magnets
D31*5.3/10.6*15mm Magnets with countersunk hole
D30*3mm Disc magnets
D10*5mm Round magnets
D15*3mm Disc magnets
D25*5mm Small disc
D40*10mm Round magnets
D28*3mm Magnets with single-sided chamfer
D18*5mm Magnets with double-sided chamfers
China Rare Earth Magnet Limited manufactures sintered ferrite ring magnet , block magnets, and other complex shapes, as well as neodymium magnets.
