China Permanent Magnet for Electric Motor
Custom Neodymium Arc Magnets for Motor
Client:
Dear China Permanent Magnet Manufacturer, We are an Italian Company manufacturing gates & garage door operators, and we are writing because we are developing a new range of products low consumption and solar energy. And for these our operators we need one type of neodymium magnets as per drawing that you can find attached. Please note the following sizes and characteristics:
Usage: magnets for electric motor (into each motor should be placed four permanent magnets N and four magnets S). Please consider that in the event we will send you orders for 15K / 20K set (four magnets N and four magnets S). So, we kindly ask you your best prices. We remain at your disposal for any other information that it may be required. Waiting for your kindly reply, thank you very much in advance for your attention.
Permanent Magnet Manufacturer China Rare Earth Magnet Limited：
I check everything with your drawing. But there is a mistake, please check! If the angle of the arc magnets is 45°, then side minor 30.61mm - side major 32.9 mm. Check the drawing I have amended. Any news, please tell me.
Client:
Yes, there is a mistake: we confirm that the side minor is 30,61mm, the side major is 32,91mm. And that the angle of the arc magnet is 45°. So, we await your kindly quotation.
Permanent Magnet Manufacturer China Rare Earth Magnet Limited：
We have large experience in doing arc magnets for electric motor. According to the drawing, please refer to the quotation: Material: Sintered Neodymium Magnet; Coating: Zinc; Size: R43xr40x30x3x45° (mm); Magnetization: Magnetized Magnetization direction: radial magnetized; Grade/N35 (The Max. working Temperature 80°)
Client:
We are interested in your quotation. But, as you can think, before send you an order we need to receive some permanent magnet samples. We have chosen the material N30 neodymium magnets (the max working temperature 100°C). The quantity that we need is no. 8pcs N-S and no. 8pcs S-N (that is the quantity required to make two motors). What is your best price to make these samples?
Client:
Dear China Permanent Magnet Manufacturer, We are an Italian Company manufacturing gates & garage door operators, and we are writing because we are developing a new range of products low consumption and solar energy. And for these our operators we need one type of neodymium magnets as per drawing that you can find attached. Please note the following sizes and characteristics:
Usage: magnets for electric motor (into each motor should be placed four permanent magnets N and four magnets S). Please consider that in the event we will send you orders for 15K / 20K set (four magnets N and four magnets S). So, we kindly ask you your best prices. We remain at your disposal for any other information that it may be required. Waiting for your kindly reply, thank you very much in advance for your attention.
Permanent Magnet Manufacturer China Rare Earth Magnet Limited：
I check everything with your drawing. But there is a mistake, please check! If the angle of the arc magnets is 45°, then side minor 30.61mm - side major 32.9 mm. Check the drawing I have amended. Any news, please tell me.
Client:
Yes, there is a mistake: we confirm that the side minor is 30,61mm, the side major is 32,91mm. And that the angle of the arc magnet is 45°. So, we await your kindly quotation.
Permanent Magnet Manufacturer China Rare Earth Magnet Limited：
We have large experience in doing arc magnets for electric motor. According to the drawing, please refer to the quotation: Material: Sintered Neodymium Magnet; Coating: Zinc; Size: R43xr40x30x3x45° (mm); Magnetization: Magnetized Magnetization direction: radial magnetized; Grade/N35 (The Max. working Temperature 80°)
Client:
We are interested in your quotation. But, as you can think, before send you an order we need to receive some permanent magnet samples. We have chosen the material N30 neodymium magnets (the max working temperature 100°C). The quantity that we need is no. 8pcs N-S and no. 8pcs S-N (that is the quantity required to make two motors). What is your best price to make these samples?
